Namco Bandai Games 90500143 Manual De Usuario
Page 59
7.
INITIALIZATION
Adjustments when Replacing Parts
The following operation must always be performed after replacing the Game PCB,
Game Software, Control Potentiometers or if the Data has been initialized.
Game Software, Control Potentiometers or if the Data has been initialized.
The game will not operate correctly if these adjustments are not made.
1.
Slide the TEST switch ON while pressing the SERVICE switch, or select “GO
TO [I/F INITIALIZE” from the I/O Test menu screen. The following screen is
displayed.
TO [I/F INITIALIZE” from the I/O Test menu screen. The following screen is
displayed.
2.
Ensure that the steering wheel is set to its centre position and both the
accelerator and brake pedals are released.
accelerator and brake pedals are released.
3.
Press the Service Switch to set to the new limits.
4.
Press the Enter Switch. The display will change to the Switch Test screen.
Turn the Steering Wheel and depress the Brake and Accelerator Pedals to
confirm that the steering and pedal controls are working correctly.
Turn the Steering Wheel and depress the Brake and Accelerator Pedals to
confirm that the steering and pedal controls are working correctly.
4.
Slide the Test switch OFF.
I/F
INITIALIZE
STEERING +0000
GAS
000
BRAKE
000
KEEP HANDLEBAR CENTER AND
PRESS SERVICE TO STORE THE RESULT
GO TO [SWITCH TEST] : ENTER SW