Juniper Networks SRX 210 Manual De Usuario

Chapter 13

Connecting, Grounding, and Powering On
the SRX210 Services Gateway

This chapter includes the following topics:

■

■

■

■

Connecting the SRX210 Services Gateway to the Power Supply

To connect the device to the power supply:

CAUTION: Before connecting the device to the power supply, attach an ESD strap
to an ESD point and place the other end of the strap around your bare wrist.

NOTE: If you are installing your services gateway on a desk, ensure that your device
is adequately grounded using the grounding point on the back panel of the chassis.

1.

Plug the DC connector end of the power cable into the power connector on the
back of the device (see Figure 25 on page 82).

2.

Plug the AC adapter end of the power cable into an AC power outlet.

Connecting the SRX210 Services Gateway to the Power Supply

■

81