Juniper Networks SRX 210 Manual De Usuario

To ground the device:

1.

Connect the grounding cable to a proper earth ground.

2.

Verify that a licensed electrician has attached the cable lug to the grounding
cable.

3.

Place the grounding cable lug over the grounding point on the upper rear of the
chassis.

4.

Secure the grounding cable lug to the grounding point with the screw.

5.

Dress the grounding cable and verify that it does not touch or block access to
the services gateway components and that it does not cause anyone to trip on
it.

NOTE: The device should be permanently connected to ground during normal
operation.

Related Topics

■

■

■

■

■

Powering On and Powering Off the SRX210 Services Gateway

This topic describes the following procedures:

1.

2.

3.

To power on the services gateway:

1.

Ensure that you have connected the power supply to the device.

2.

Insert the plug of the power supply adapter into an AC power source receptacle.

3.

Turn on the power to the AC power receptacle.

The device starts automatically as the power supply completes its startup sequence.
The Power LED lights up during startup and remains on steadily when the device is
operating normally.

Powering On and Powering Off the SRX210 Services Gateway

■

85

Chapter 13: Connecting, Grounding, and Powering On the SRX210 Services Gateway