Juniper Networks SRX 210 Manual De Usuario

19.

Optionally, configure additional properties by adding the necessary configuration
statements. Then commit the changes to activate them on the device.

[edit]
admin@host# commit

20.

When you have finished configuring the device, exit configuration mode.

[edit]
admin@host# exit
admin@host>

Related Topics

■

■

■

■

■

Performing Initial Software Configuration on the SRX210 Services Gateway Using
the J-Web Interface

This topic includes the following sections:

■

■

To establish basic connectivity:

1.

Connect an Ethernet cable from any of the 

ge-0/0/1

 or 

fe-0/0/2 

 to 

fe-0/0/7

ports to the Ethernet port on the management device (workstation or laptop).

2.

Connect the power cable to the device and a power source. (We recommend
using a surge protector.) Note the following indications:

■

Power LED (solid green): The device is receiving power.

■

Status LED (solid green): The device is operating normally.

NOTE: The services gateway functions as a DHCP server and will assign an IP address
to the management device.

3.

Ensure that the management device acquires an IP address on the 192.168.1.0/24
subnetwork (other than 192.168.1.1) from the device.

Performing Initial Software Configuration on the SRX210 Services Gateway Using the J-Web Interface

■

107

Chapter 16: Performing Initial Software Configuration on the SRX210 Services Gateway