Juniper Networks SRX 210 Manual De Usuario
Table 43: Component LEDs on the Services Gateway (continued)
Possible Causes and
Corrective Actions
Corrective Actions
Meaning
State
LED
Normal condition. No
action is required.
action is required.
The port is inactive.
Off
Voice Interface
LED
LED
Normal condition. No
action is required.
action is required.
The port is active and
functioning normally.
functioning normally.
Green (Steady)
Normal condition. No
action is required.
action is required.
The port is active and not
ready for data
communication.
ready for data
communication.
Amber
Normal condition. No
action is required.
action is required.
The port is active and data
communication is taking
place.
communication is taking
place.
Green (Blinking)
Normal condition. No
action is required.
action is required.
The port is initializing.
NOTE: The Voice Interface
port LED glows red (blinking)
while initializing. If there is
an error, the LED remains
red; otherwise, the LED
changes to green.
port LED glows red (blinking)
while initializing. If there is
an error, the LED remains
red; otherwise, the LED
changes to green.
Red (blinking)
Contact the Juniper
Networks Technical
Assistance Center (JTAC).
See “Juniper Networks
Technical Assistance
Center” on page 128.
Networks Technical
Assistance Center (JTAC).
See “Juniper Networks
Technical Assistance
Center” on page 128.
The Port has detected a
hardware initialization
failure.
hardware initialization
failure.
Red (steady)
Related Topics
■
■
■
■
■
■
Monitoring the SRX210 Services Gateway Using Chassis Alarm Conditions
When the services gateway detects an alarm condition, the alarm LED on the front
panel turns red or amber as appropriate.
panel turns red or amber as appropriate.
To view a more detailed description of the cause of the alarm , issue the
show chassis
alarms
CLI command.
122
■
Monitoring the SRX210 Services Gateway Using Chassis Alarm Conditions
SRX210 Services Gateway Hardware Guide