Johnson Controls Inc. Marine Radio s1-ttscc01 Prospecto
Subject to change without notice. Published in U.S.A.
Copyright © 2010 by Johnson Controls, Inc. All rights reserved.
Johnson Controls Unitary Products
5005 York Drive
Norman, OK 73069
DEMO MODE USER’S MANUAL
Premium High Definition Touch Screen Communicating Control
Models: S1-TTSCC01
POWER-UP SEQUENCE
The communicating control will load the following screens upon initial power up:
Screen 1 – Set date and time by selecting a field and using the up/down arrows provided.
Screen 1 – Set date and time by selecting a field and using the up/down arrows provided.
See figure at right.
Screen 2 – The control will display the Software Revision.
Screen 3 – The control “listens” for network traffic for a random interval between 1 – 10 seconds.
Screen 4 – The control “gathers” system information.
Screen 5 – Set the Mode of Operation to Demo Mode. See figure at right.
Screen 6 – Select the type of indoor equipment to demo.
Screen 7 – Select the type of outdoor equipment to demo.
Screen 3 – The control “listens” for network traffic for a random interval between 1 – 10 seconds.
Screen 4 – The control “gathers” system information.
Screen 5 – Set the Mode of Operation to Demo Mode. See figure at right.
Screen 6 – Select the type of indoor equipment to demo.
Screen 7 – Select the type of outdoor equipment to demo.
NON-ADJUSTABLE SETTINGS/FUNCTIONALITY
Homeowner:
Setting / Functionality
Access Path
Notes
View Equipment / Accessory Details
Menu > Status
Device icons are not selectable.
Service:
Setting / Functionality
Access Path
Notes
View Equipment / Accessory Details
Main Status screen
Device icons are not selectable.
Edit Dealer Information / Logo
Menu > Tools/Settings > Dealer Information
Edit button is not present.
System Event:
The communicating control will display the following system event 2 minutes after power‐up:
Air Filter Reminder Expired – applies to all systems
Air Filter Reminder Expired – applies to all systems
Equipment Faults:
The communicating control will display the following equipment faults 3 and 4 minutes after power‐up:
Limit Switch Open – applies to all Air Handler applications
Soft Limit Warning – applies to all Furnace applications
Ambient Sensor Open – applies to all Heat Pump applications
HPS Lockout – applies to all Air Conditioner applications
Limit Switch Open – applies to all Air Handler applications
Soft Limit Warning – applies to all Furnace applications
Ambient Sensor Open – applies to all Heat Pump applications
HPS Lockout – applies to all Air Conditioner applications
Status Screen:
With each Refresh button press, the system will toggle through pre‐programmed states for all devices:
9 States – applies to Heat Pump application 6 States – applies to Air Conditioner applications
AVAILABLE SETTINGS
Reference the User’s Information and Installation Manuals for adjusting the all other settings not listed above.
Thermostat Humidifier
UV
(HP4)
(HP4)
EAC
(HP15)
(HP15)
AH
AC
ON
OFF
ON
OFF
FAULT
OFF
ON
OFF
ON
ON
FAN
TIME
DELAY
DELAY
ON
OFF
10%
10%
FAN
LO COOL
ON
OFF
10%
10%
FAN
HI COOL
ON
ON
ON
ON
FAN
LO HEAT
ON
ON
ON
ON
FAN
HI HEAT
ON
OFF
10%
10%
4.8KW
DEFROST
ON
10%
10%
10%
14.4KW HI HEAT
ON
10%
ON
ON
14.4KW FAULT
Thermostat
Humidifier
(AC8)
(AC8)
UV
EAC
AH
AC
ON
OFF
ON
OFF
FAULT
OFF
ON
OFF
ON
ON
FAN
TIME
DELAY
DELAY
ON
OFF
10%
10%
FAN
LO
COOL
COOL
ON
OFF
ON
10%
FAN
HI
COOL
COOL
ON
10%
ON
ON
4.8KW
OFF
ON
ON
ON
ON
14.4KW
FAULT