Motorola PTP 400 Series Manual De Usuario

 

 

105

If all the settings are correct and appropriate click the “Confirm Configuration and Reboot 

Unit” button. All the attributes are committed to non-volatile memory. Immediately following 

the write to non-volatile memory the unit is reset.  

 If you have changed the Ethernet parameters you must reconnect using the correct 

network and address settings.  

If the installer wishes to modify the installation configuration then the ‘Back’ link can be used 

to access the installation wizard steps described above. 

8.3.5.5 Disarm 

 

The next step of the installation wizard is the Disarm Phase.