Motorola PTP 400 Series Manual De Usuario

 

 

122

8.3.9  Spectrum Management - Fixed Frequency

 

The software for the PTP 400 Series Bridge allows a user to optionally fix transmit and 

receive frequencies for a wireless link. Once configured the spectrum management software 

will not attempt to move the wireless link to a channel with lower co- and adjacent channel 

interference. Therefore this mode of operation is only recommended for deployments where 

the installer has a good understanding of the prevailing interference environment. (See 

Section  8.3.5.3  “Wireless Configuration” - Fixed Transmit Frequency, Fixed Receive 

). Care must also be taken to ensure that the frequency allocations at each end of 

the link are compatible. To help the user when identifying the mode of operation Spectrum 

Management uses two visual cues. See Figure 62. The main page title identifies the mode of 

operation using the ‘- Fixed Frequency Mode’ postfix., and the selected channels are 

identified by a red capital ‘F’.