Motorola PTP 400 Series Manual De Usuario

 

 

39

When shipped from the factory, units are configured as follows: 

•  4.9 GHz PTP 400 Series Bridge – Region Code 14 
•  5.4 GHz PTP 400 Series Bridge – Region Code 9 
•  5.8 GHz PTP 400 Series Bridge – Region Code 1 

 To meet the regulatory requirements of your region you should set the correct 

Region Code by obtaining a new License Key from you reseller or distributor. 

5.3 Operational 

Restrictions 

5.3.1 Radar 

Avoidance 

Radar Avoidance requires that equipment used in the region: 

•  Detects interference from other systems and avoids co-channel operation with these 

systems, notably radar systems. 

•  Provide on aggregate a uniform loading of the spectrum across all devices. 

To address the primary aims the Spectrum Management algorithm implements a radar 

detection function which looks for impulsive interference on the active channel only. If 

impulsive interference is detected Spectrum Management will mark the current active channel 

as having detected radar and initiate a channel hop to an available channel. The previous 

active channel will remain in the radar detected state for thirty minutes after the last impulsive 

interference pulse was detected. After the thirty minutes have expired the channel will be 

returned to the available channel pool. 

The radar detection algorithm will always scan the active channel for 60 seconds for radar 

interference before using the channel. This compulsory channel scan will mean that there is a 

60-seconds service outage every time radar is detected and that the installation time is 

extended by 60 seconds even if there is found to be no radar on the channel.  

 On system installation or start-up this extends the initial scan time of the Master unit 

by 60 seconds. 

To address the “provide aggregate uniform loading of the spectrum across all devices” 

requirement, the channel selection algorithm will choose a channel at random from a list of 

available channels. The channel selection algorithm is initiated at link initialization and when 

radar interference is detected.