Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Motorola
  4. PTP 400 Series
  5. Manual De Usuario

Motorola PTP 400 Series Manual De Usuario

Descargar
Página de 208
 
 
93
8.3.5  Install Wizard Pages
 
 
These pages are used during system installation. There follows a description of the install 
pages along with their use during the installation configuration process. The actual installation 
process is described in section 7.7.10 “Aligning the ODUs”.  
All wireless links are shipped as paired units. They are pre-configured at the factory so that 
they can be installed without the user supplying any configuration. Each wireless link is 
shipped with a Quick Start Guide. Attached to the Quick Start Guide is a summary of the 
default configuration data. Table 11 shows a sample link configuration. The values 
highlighted
 
have been committed to the wireless units non-volatile storage. 
Example PTP 400 Series Bridge Configuration Data
For your convenience these two units have been pre-configured as a link 
Units:
ODU serial number 
ODU serial number 
0167800002BE 0167800002BF 
Ethernet MAC address 
Ethernet MAC address 
00:04:56:00:02:BE 00:04:56:00:02:BF 
Configured as:
 
Master Slave 
Target MAC address 
Target MAC address 
00:04:56:00:02:BF 00:04:56:00:02:BE 
License Key 
License Key 
A471-FE88-428D-E1F3 534F-4F54-D1B0-E2DA 
IP Address 
IP Address 
169.254.1.2 169.254.1.1 
Table 11 - PTP 400 Series Bridge Factory Configuration Values 
The factory default configuration is written to the ‘semi-permanent’ configuration bank.  
WARNING:
 The factory default configuration is limited in range to 40 Km (25 miles). If you 
wish to install a wireless link with a range of > 40 Km (> 25 miles) and < 200 Km (< 124 miles)