Motorola PTP 400 Series Manual De Usuario

 

 

97

8.3.5.3  Wireless Configuration  

A discussion of the wireless configuration and its relationship to the band of operations is 

contained in section 5 “General Considerations”. It is recommended that the installer reads 

this section before commencing with the product installation. 

Step 2 of the installation wizard requires the installer to enter the wireless configuration 

parameters: 

 

 The MAC Address of the peer unit that will be at the other end of the 

wireless link. This is used by the system to ensure the unit establishes a wireless link to the 

correct peer.  

The MAC Address can be found embedded within the serial number of the unit. The last six 

characters of the serial number are the last three bytes of the unit’s MAC address. 

 A PTP 400 Series system is shipped as a pair of units with pre-loaded correct MAC 

addresses. MAC addresses will only need to be entered if an existing unit has to be replaced 

in the field or the units configuration has been erased.