Motorola Car Satellite TV System VIP1200 Series Manual De Usuario

Before calling your service provider, review this troubleshooting guide. If 
the suggestions do not help you quickly solve a problem, contact your 
service provider. 

Verify that the AC power cord is connected to the TV 
receiver and an AC outlet. Unplug the TV receiver from 
the outlet, plug it back in, and press the POWER button. 

If the TV receiver is connected to a switched outlet on 
another unit, verify that that unit is powered on. Unplug 
the TV receiver from the AC outlet, plug it back in, and 
press the POWER button. 

Press the POWER button on the TV receiver front panel 
instead of the remote control. The batteries in the remote 
control may be depleted. 

Verify that the TV is on. 

Verify that there are no obstructions between the remote 
control and the TV receiver. Aim the remote control 
directly at the TV receiver front panel, not the TV or VCR. 

The angle between the remote control and the TV 
receiver may be too large. Stand in front of the TV 
receiver and not too far to either side. 

Press and release operation keys one at a time, firmly and 
deliberately. 

Try changing channels using the buttons on the TV 
receiver front panel. 

Check the batteries in the remote control. Install new 
batteries if needed.