MPC OM-20000072 Manual De Usuario
Software Programs
Chapter 6
MPC User Manual Rev 0D
63
SET UP BASE STATION
To set up your MPC as a base station, click on the Set Up Base Station button in the Receiver Setup
dialog, see Figure 59, to bring you to the List Current Configuration window where you can enter
GPS commands. See also List Current Configuration starting on Page 63.
dialog, see Figure 59, to bring you to the List Current Configuration window where you can enter
GPS commands. See also List Current Configuration starting on Page 63.
To fix the position for your MPC base, enter the Latitude, Longitude and Height using the FIX
command. If you do not fix the base station position, the current position is computed by the MPC.
command. If you do not fix the base station position, the current position is computed by the MPC.
Use the Set Up Logging window to enter the RTCA, RTCM, or CMR messages that your base station
will transmit. See also Section 6.1.1.1, Logging Setup on Page 51.
will transmit. See also Section 6.1.1.1, Logging Setup on Page 51.
For more information on base station commands and logs, please refer to Volume 2 of the OEM4
Users’ Guide.
Users’ Guide.
PARSING RESPONSES SETUP
The Parsing Responses page is also available through the main Logging window. See Section 6.1.1.2,
Parsing Responses on Page 53.
Parsing Responses on Page 53.
LIST CURRENT CONFIGURATION
The Set Up Logging screen, see Figure 46 on Page 51, is for setting up logs only. Use the List Current
Configuration button in the Receiver Setup dialog, see Figure 59 on Page 62, to bring you to the Rx
Config from GPS screen, shown in Figure 60 on Page 64, that will allow you to issue commands to
the internal Euro4 GPS receiver or simply check the current receiver configuration.
Configuration button in the Receiver Setup dialog, see Figure 59 on Page 62, to bring you to the Rx
Config from GPS screen, shown in Figure 60 on Page 64, that will allow you to issue commands to
the internal Euro4 GPS receiver or simply check the current receiver configuration.
Once you have reviewed the MPC receiver’s current configuration, return to the Receiver Setup page
by clicking on the Home button, or add/edit a command by typing it in the Enter GPS Command field.
by clicking on the Home button, or add/edit a command by typing it in the Enter GPS Command field.
When you enter a command, ensure to type in its complete syntax if necessary. Only optional fields
may be omitted. For details on available commands, please refer to Volume 2 of the OEM4 Users’
Guide.
may be omitted. For details on available commands, please refer to Volume 2 of the OEM4 Users’
Guide.
Click on the Send button to send your command to the MPC. The Command\Response System
Summary, see Figure 47 on Page 53 appears with your commanded added at the bottom. Click on the
Home button to return to the Receiver Setup page.
Summary, see Figure 47 on Page 53 appears with your commanded added at the bottom. Click on the
Home button to return to the Receiver Setup page.
Click on the List Current Configuration button to check your new receiver configuration or to add/edit
another command.
another command.
Click on the Refresh button at the bottom of the Rx Config from GPS screen at any stage to refresh the
current configuration list.
current configuration list.
WARNING:
The Euro4 GPS receiver communicates with the MPC main processor via COM1. Do
not disturb the COM1 configuration or unexpected results may occur.
not disturb the COM1 configuration or unexpected results may occur.
* COM3 on the Euro4 GPS receiver is connected to the DGPS port on the back of the MPC for
general GPS input/output.