MPC OM-20000072 Manual De Usuario

Descargar
Página de 102
90
MPC User Manual Rev 0D
Appendix B
GPS Overview
 Figure 83: Single-Point Averaging
* This graph represents typical results using position averaging.
This function is useful for obtaining the WGS84 position of a point to a reasonable accuracy without 
having to implement differential GPS. It is interesting to note that even a six hour occupation can 
improve single-point GPS accuracy from over fifty meters to better than five meters. This improved 
accuracy is primarily due to the reductions of the multipath and selective availability errors in the GPS 
signal.
Again, it is necessary to keep in mind that the resulting standard deviations of the position averaging 
can vary quite a bit, especially over relatively short averaging times. To illustrate, the position 
averaging function was run for a period of one hour at three different times during the day. The 
resulting standard deviation in latitude varied from 4.7 to 7.0 meters. Similarly, the variation in 
longitude and height were 4.9 to 6.7 meters and 10.9 to 12.5 meters respectively. This degree of 
variation is common for averaging periods of less than 12 hours due to changes in the satellite 
constellation. The graph, however, should at least provide some indication of the accuracy one may 
expect from single-point position averaging.
0
5
10
15
20
25
30
35
0
4
8
12
16
20
24
28
32
36
40
44
48
Time (hours)
S
tan
d
a
rd
 Devi
ati
o
n
 (meters)
Latitude
Longtitude
Height