MicroNet Technology SP907NL Manual De Usuario

 

 

11

 

If users cannot see the access point, please click ‘Rescan’ button to scan for 

access point again, until the one preferred is displayed on the interface. Users 

may have to click ‘Rescan’ for more than two times before the access point 

wish to connect appears. If user still cannot see the access point after clicking 

‘Rescan’ for more than five times, please move the computer closer to the 

wireless access point. 

 

If users wish to see detailed information for a specific access point, please 

double-click on it, and detailed information will be provided. 

 

Displays basic information about this access point, such as 
SSID, MAC Address, authentication / encryption type, 
channel etc. 

If this access point supports WPS (Wi-Fi Protected Setup), 
related information will be displayed here. 

If this access point supports CCX (Cisco Compatible 
eXtension), related information will be displayed here. 

If this access point complies with 802.11n draft, related 
information will be displayed here. 

Users can decide how to sort all listed access point by ‘SSID’, 
‘Channel’, or ‘Signal’ (signal strength). 

Check this box to show the signal strength of access point, 
instead of percentage. 

Click this button to rescan access points. Users can click this 
button for several times, if the access point users wish to use 
does not show in the list. 

Users can store a specific access point to profile, so access 
point can be directly connected next time, without inputting 
authentication key again. To add an access point to profile, 
users have to select an access point from the list first, then 
click ‘Add to Profile’ button. Detailed instructions will be given 
below. 

Connect to a selected access point. Users have to select an 
access point from the list first and then click ‘Connect’ to 
connect to the selected access point. 

 

If the wireless access point users wish to connect is found, it can establish 

connection by clicking on ‘Connect’ button. Instructions will be given as follow: