MicroNet Technology SP907NL Manual De Usuario

 

 

29

 

 

All access points with WPS function enabled will be displayed here. Please 

make sure the access point users wish to connect is displayed. If not, please 

click ‘Rescan’ few more times. The user can also click ‘Information’ button to 

see the detailed information about selected access point. 

 

Step 3. Start PBC pairing procedure at access point side (please refer to the 

instruction given by your access point’s manufacturer), then click ‘PBC’ button 

in wireless configuration utility to start to establish wireless connection by WPS. 

Please be patient as this may require several seconds to one minute to 

complete. When users see ‘WPS status is connected successfully’ message, 

means the connection between this wireless network card and access point is 

successful. 

 

Users can click ‘Detail’ button to see further information of connected access 

point. If users wish to save this connection as a profile, they can click ‘Export 

Profile’ button, and this connection will be saved. Users can find this connection 

in ‘Profile’ tab in a later time. 

 

Sometime WPS may fail (In the following picture, WPS pairing is failed because 

no WPS-enabled access point is found):