Meridian America 596 Manual De Usuario

To connect to other Meridian 500
Series equipment

●

Connect one of the COMMS sockets on the back panel of the

DVD player to one of the COMMS sockets on another 500

Series unit, using the 500 comms lead provided with the 596

DVD Player.

The sequence in which you connect the units is not important.

596 DVD Player

500 Series unit

COMMS

COMMS

Then configure the units with the following automatic setup

procedure:

●

Switch all the units to standby.

●

Press Clear (remote).

Each unit will display:

Auto

One unit will then be designated

as the controller, and display:

Controller

This is the unit that will respond to the remote.

All the other units will be configured

as non-controllers, and display:

Not Con.

Your system is now set up and ready for use.

●

If for any reason the automatic setup does not give the

configuration you want, restore the default operation by

Note: Do not, under any circumstances, connect any equipment

other than Meridian 500, 600, or 200 Series to the socket

marked COMMS on the back of the DVD player.