Meridian America 596 Manual De Usuario

No lights are displayed when
switching on

❍ Check that your AC power supply is connected correctly.

❍ Check that the ON/OFF switch on the back panel is in the ON

position.

There is no sound when playing a disc

❍ Check that your preamplifier is switched on, and the volume is

at an appropriate level.

❍ Check that the DVD player is connected correctly to the other

❍ Check that the correct source has been selected on your

preamplifier.

❍ Try playing another disc. If this disc works, check the problem

disc for signs of dirt or damage.

❍ If you are using the DVD player with a preamplifier or active

loudspeakers check that the Digital audio format menu

option is set to PCM; see To select the digital audio output

There is interference on the radio and/
or television when the DVD player is
switched on

Before following the steps below, ensure all units are switched

off.

If this equipment does cause or suffer from interference to/from

radio or television reception then the following measures should

be tried:

❍ Reorient the receiving aerial (or antenna) or route the antenna

cable of the receiver as far as possible from the 596 DVD

Player and its cabling.

❍ Ensure that the receiver uses well-screened antenna cable.

❍ Relocate the receiver with respect to the DVD player.

❍ Connect the receiver and this product to different AC outlets.

The video picture is monochrome

If you are using the S-Video output, make sure that S is selected

in the Video output menu

Otherwise, check your video cabling.