Memorex MVBD2535GPH Manual De Usuario

SETUP MENU (CONTINUED)

If using a wired internet connection, select WIRED using the

Navigation (π,†) buttons, then press the ENTER button,

and the unit will automatically be configured to access the

internet. If successful, you will get the message, Wired

network connection successfully set up.

If using a wireless internet connection, see pages 41-42.

CONNECTION

Link Status: If the network connection is active, “Link Up”

appears below Link Status. If the network connection is not

active, “Link Down” displays below Link Status.

MAC Address: This will show the MAC Address.

IP Mode: Select Off to disable the interface. Select Manual

to manually configure network settings, such as IP address,

subnet mask, and gateway settings. Select Dynamic to use

the DHCP to automatically obtain the IP Address.

You can configure the IP Address, Subnet Mask, Gateway,

Primary DNS and Secondary DNS, but it is not recommended

unless informed to do so by your ISP provider. Press the

ENTER button when confirming these options.

MANUAL NETWORK SETUP

NETWORK SETUP MENU:

To enter the Network Setup menu, while no disc is inserted or disc is in the Stop mode, if not already at the Setup screen press

the HOME/SETUP button, select Settings using the Navigation (π,†) buttons and then press the Navigation (®) button.

Select Network using the Navigation (π,†) buttons and then press the Navigation (®) button.

The unit will perform a network test. When the test is

complete, a confirmation window will appear. Press the

ENTER button to select “OK”.

If the test fails, double-check your Ethernet cable connection,

wireless router, IP settings, or contact your ISP.

NETWORK TEST

INFORMATION SETUP MENU:

To enter the Network Setup menu, while no disc is inserted or disc is in the Stop mode, if not already at the Setup screen press

the HOME/SETUP button, select Settings using the Navigation (π,†) buttons and then press the Navigation (®) button.

Select Info using the Navigation (π,†) buttons and then press the Navigation (®) button. The information on the unit, such

as Software Version, Software Date, Hardware Version, etc. will appear. These items cannot be changed.

QUICK SETUP MENU:

To enter the Quick Setup menu, while no disc is inserted or disc is in the Stop mode, if not already at the Setup screen press the

HOME/SETUP button, select Settings using the Navigation (π,†) buttons and then press the Navigation (®) button. Select Quick

Setup using the Navigation (π,†) buttons and then press the Navigation (®) button. If you select “Yes, perform Quick Setup”, you

can select OSD language, Resolution and TV aspect, or select “No, thanks. I’ll go through the full setup menu later” to return to the

previous menu.