Maxxsonics High Definition Video Server MAXX-2400HD Manual De Usuario

MAXX-2400HD Owner’s Manual

Page 25

HD-SDI Video Inputs

The MAXX-2400HD records Digital video on channels 1 and 2. It has separate BNC inputs for
HD-SDI (serial digital per SMPTE 292M). HD-SDI inputs have a fixed 75-ohm termination.

HD-SDI Video Outputs

Channels 1, 2, 3 and 4 have HD-SDI video outputs per SMPTE 292M.

CVBS Monitor Outputs

Channels 1, 2, 3 and 4 have letterboxed composite video monitoring outputs.

Genlock Sync Reference

The MAXX-2400HD is designed to be referenced to an external genlock source in the form of
RS-170 black. The GENLOCK

GENLOCK

input provides a fixed 75-ohm termination. An internal crystal

reference is also provided so that the server can be used as a stand-alone player.

Gigabit Ethernet Port

A Gigabit Ethernet port is provided on the MAXX-2400HD. The NET 1

NET 1

port is intended for

external transfer of program content between video servers. The NET 1

NET 1

port is also used for remote

control using the optional Remote Workstation software. The NET 2

NET 2

port is reserved for future use

and is not active. Use only the NET 1

NET 1

port.

LTC Time Code Input

An LTC time code input is provided for Channel 1 and Channel 2. The LTC input provides a

>10k ohm termination. This input may be selected by means of the On-Screen user interface and
recorded as a time code reference.  This input may be selected by means of the On-Screen user
interface and used as a start time reference.  Note that time code is not actually recorded, the time
code read at the start of recording is captured.  When the clip is played back, the time code (in
display, VITC and LTC outputs) starts from the captured time and proceeds continuously.

LTC Time Code Output

An LTC time code output is provided on the LTC OUT

LTC OUT

BNC connector. It may be selected by

means of the On-Screen user interface to output time code from any of the four video channels
during playback. The LTC output has a source impedance of <5 ohms.

Keyboard

Attach the alphanumeric keyboard to the purple 5-pin KEYBD

KEYBD

connector to control the server

and manage clips with the On-Screen graphic user interface. The server will only recognize the
keyboard if it is attached before power up.

Mouse

A two-button scroll mouse is provided with the MAXX-2400HD. Plug the mouse into the

green 5-pin MOUSE

MOUSE

port. Do not use the USB ports, even if the supplied mouse is USB capable.

Note that the server will only recognize the mouse if it is attached before power up.

Monitor

A VESA-compliant computer monitor may be connected to the 15-pin VGA video port. The

MAXX-2400HD resolution is fixed at 1024 x 768 pixels, with a refresh rate of 72 Hz. This is best-