Maxxsonics High Definition Video Server MAXX-2400HD Manual De Usuario
Page 54
MAXX-2400HD Owner’s Manual
Configuring the Ethernet Network
MAXX-2400HD provides a number of user settings that configure it for use in a practical
network. These will be found on the Configure Network tab shown below.
The NET
NET
NET
NET----1
1
1
1
Ethernet port on the server has a unique IP Address. In this way, each server can be
identified on the network.
Network Settings Tab
Use the Main Menu selection bar at the top of the server GUI to configure network
communication settings.
communication settings.
Click EDIT>CONFIGURE->NETWORK
The screen of Figure 18 is displayed.
The screen of Figure 18 is displayed.
Figure 18 - Network Configuration Screen
The server is shipped with a default network Host Name and IP Address. Qualified network
engineers may change these configurations to suit your specific network environment. Factory
defaults for networking are:
defaults for networking are:
• Network Disabled
• Use DHCP
• Use DHCP
Disabling the Network [X]
This selection turns the network OFF or ON. The default is Disabled (the box is checked). To
Enable the network connection, click the box to un-check it. Disabling the network can be used to
deny access to the server from the network for security purposes.
deny access to the server from the network for security purposes.