Maytag MBV1976AA Manual De Usuario

9

Assembly

Your SkyBox™ personal beverage vendor comes with a
standard front panel. To purchase customized,
interchangeable front and side display graphics visit
your local retailer or www.skyboxbymaytag.com.

• Make sure SkyBox™ personal beverage vendor is

OFF and the power cord is unplugged.

• Remove top of SkyBox™ personal beverage vendor

by lifting up the tabs at rear of top panel. Pull top
cover back slightly to remove from frame. Set aside.

• Slide one customized display graphic into each side

of the SkyBox™ personal beverage vendor, tucking
the panels in at the bottom within the grooves in the
frame.

• Replace the top cover by sliding hooks into front and

then pressing down tabs at the rear.

• Flip up the graphic access cover, exposing a screw

and the top edge of the front display graphic.

• Remove the screw.

• Gently press hands onto front display graphic within

frame and slide it up and out of the personal
beverage vendor.

• Slide the new customized display graphic into the

frame, making sure the panel slides behind the lower
edge of the frame opening.

• Flip the display graphic access cover back down into

place.