Lynx Computer Accessories R FR 5010 Manual De Usuario

 

 

Page 27  

 

 

Hot Swapping 

Power Supplies 

The Series 5000 CardModules and Power Supplies 
are fully hot swappable in the event of a fault or 

failure. 

 

Power Supply Failure 

A failure in the Primary power supply will 

automatically trigger the use of the redundant 
supply (if fitted) and will trigger the following alarm 

conditions / indications(requires controller option). 

 
•  Reported fault on the monitoring system  

 

•  Alarm GPO trigger on the alarm connector (see 

•  Front Panel LED (normally green) will go out (See 

Once identified, the defective supply can be 

removed and replaced with power connected 

with no interruption to the operation of the 

CardModules. 
 

CardModules 

If a CardModule fails the error will be reported over 

the monitoring system and via the front side alarm 
LED. Alarm function is module dependant so please 

refer to the CardModule manual for failure 

conditions and indications. The defective 
CardModule can be removed and replaced with 

an identical replacement without removing power 
from the frame.