Cisco IOS software for the Catalyst 4500 Series Supervisor Engine II-Plus-10GE S45IPBU-12246SG= Manual De Usuario
Los códigos de productos
S45IPBU-12246SG=
Product Bulletin
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 4
Cisco IOS Software Release 12.2(46)SG1 for Cisco
Catalyst 4500 Series Supervisor II-PLUS-10GE
Catalyst 4500 Series Supervisor II-PLUS-10GE
Overview
This product bulletin describes the hardware and software features supported by Cisco IOS
®
Software Release 12.2(46)SG1 for the Cisco
®
Catalyst
®
4500 Series Supervisor Series Engine II-
PLUS-10GE.
Primary Release Message
Cisco announces Cisco IOS Software Release 12.2(46)SG1 for all shipping Cisco Catalyst 4500
Supervisor Series Engines II-PLUS-10GE, which includes a new Lan Based and IP upgrade
image.
Overview
The following new features of Cisco IOS Software Release 12.2(46)SG1 are applicable to Cisco
Catalyst 4500 Series:
Supervisor II-Plus-10GE
Release 12.2(46)SG1 introduces a new LAN Base Software image and an IP upgrade image.
These will complement the existing IP Base and Enterprise Services image.
The LAN base image is supported on the Supervisor II-Plus-10GE only. It is primarily focused on
customers Layer 2 requirements and therefore many of the IP Base features have been removed.
If at a later date some or all of the features are required, the IP upgrade image is available.
Software Features
Release 12.2(46)SG1 introduces a new LAN Base Software image and an IP upgrade image. Lan
Base supports all the features available on the IP Base image except for the features outlined in
the following table.
Table 1.
Cisco IOS Software Release 12.2(46)SG1 Features not supported on the Lan Base image.
Feature
Auto-QoS
CTS
EEM
EIGRP Stub
EPoE/PoE+
FHRP(HSRP/VRRP)
Flex Link
GLBP
ISSU
L2PT
MLD Snooping
Netflow