Livescribe PULSE Manual De Usuario

Turning off the Menu Voice will not affect Paper Replay audio or other Pulse smartpen sounds. 

For more information on Volume Control, see Chapter 4:Using Paper Replay™.  

  

When you tap your notes to play back a Paper Replay session, the audio will play from a 

moment five seconds before the note was actually written.  This allows you to more accurately 

replay the moment because there is natural delay between the time when you hear an important 

point and the time when you begin writing. 

Tap the Playback Latency Off button 

 to turn off this latency. You will want do this if you are 

playing back a recording wherein your audio and writing are perfectly synchronized.  

Use the Audio quality setting to change the compression rate of the recorded AAC audio

−the 

higher the audio quality, the lower the compression rate. As a result, files recorded with the 

highest audio quality setting will be larger files that require more storage space.  

1. Tap 

High 

 to record at the highest audio quality. This setting will require the 

largest amount of storage space and is optimal for very large environments or 
when the highest quality recording is required.   

2. Tap 

Medium 

 to return to the default recommended audio quality setting.   

3. Tap 

Low   to record at lowest audio quality. This is a memory saving setting 

that will utilize the least amount of memory and is optimal for dictations or 
smaller quieter recording environments.  

These settings cannot be changed during recording. Always select the 

appropriate audio quality setting before beginning a recording. 

You can change the Pulse smartpen microphone sensitivity for different recording situations.  

•  Tap on Conference Room 

 to set the microphone sensitivity for quieter 

environments where the person speaking is closer to the microphone. This setting is 
optimal for dictations, offices, or small conference room settings.  

•  Tap on Lecture Hall 

 to set the microphone to pick up sounds in a wider 

open area. This setting is optimal for large rooms where the speaker’s voice is 
distant from the Pulse smartpen microphone. We also recommend the use of the 3D 
Recording Headset when recording in this type of environment.