Linksys EG1032 V3 Manual De Usuario

14

Chapter 7: Configuring the 10/100/1000 Gigabit Network 
Adapter in Windows XP or 2000

Linksys recommends that you use the default settings of the Adapter; however, if you wish to alter the default 
settings, then follow these instructions to access the Adapter’s configuration in Windows XP or 2000.

1. If you are using Windows XP, click Start. Select Settings and click Control Panel. Double-click System and 

click the Hardware tab. Proceed to step 2.

If you are using Windows 2000, click Start. Select Settings and click Control Panel. Double-click 
Administrative Tools and then double-click Computer Management. 

2. Click the Device Manager tab and then the + sign next to Network adapters. Right-click the Gigabit 

Network Adapter, and click Properties.

3. The General tab will appear. Make changes to the Adapter’s configuration using this and four additional tabs.

The Adapter offers five configuration tabs: General, Advanced, Driver, Resources, and Power Management.

General

You will be able to access the Device usage feature and start the troubleshooter from this tab. Click the OK button 
to save any change.