Intermec 700 Manual De Usuario
Windows Mobile 2003
Chapter
—
2
112
700 Series Color Mobile Computer User’s Manual
To Enable WPA Authentication Using a Preshared Key (730, 741, 751, 761 Computers)
a
Set Authentication to “WPA-PSK.” See page 372 for information
about WPA encryption.
about WPA encryption.
b
Set Data Encryption to either “WEP” or “TKIP.” See page 372 for
information about WEP and TKIP encryption.
information about WEP and TKIP encryption.
c
Enter the new Network key.
5
Tap the 802.1x tab, select either “PEAP” or “Smart Card or Certificate”
for the EAP type, then tap Properties to adjust its settings.
for the EAP type, then tap Properties to adjust its settings.
6
Tap ok to return to the Configure Wireless Network screen.
7
From the Networks to access drop-down list, select “All Available,”
“Only access points,” or “Only computer-to-computer” depending on
the type of networks to which you connect.
“Only access points,” or “Only computer-to-computer” depending on
the type of networks to which you connect.