Infinite Peripherals PP55 Manual De Usuario
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
Infinite Peripherals, Inc.
Page
22
www.ipcprint.com
PP-55 User’s Manual v4.01 for Pocket PC
Verify Printer Connected
After installing the Print Manager software package on to your PDA, do a quick check to
determine if the printer is charged and PDA is securely in the PP-55 cradle.
determine if the printer is charged and PDA is securely in the PP-55 cradle.
The following will help you to determine these conditions.
Case #1: Open the Print Manager so that
the screen on the right is displayed.
Note that the printer [Voltage] indicates
no data.
The same is true for the [Temperature] option.
This means that PP-55 is not connected.
Note that the printer [Voltage] indicates
no data.
The same is true for the [Temperature] option.
This means that PP-55 is not connected.
Figure 23
Case #2: Open the Print Manager so that the
screen on the right is displayed.
Tap the [ Connect ] command option.
If connection was successful, the Voltage
and Temperature fields should now indicate
values as shown in the example on the right.
Tap the [ Connect ] command option.
If connection was successful, the Voltage
and Temperature fields should now indicate
values as shown in the example on the right.
Figure 24
Note: If Voltage and Temperature fields still show no connectivity as in Case #1 and the battery
has been initially charged, refer back to section “Attaching PDA” to make sure the PDA
has been attached correctly.