IGo Direct PPC 6700 Manual De Usuario

 
Despite a high degree of reliability, the Bluetooth connection could break for 
many reasons: 

 

¾  When the mouse is powered off, the mouse 

circuit will be powered off, and the Bluetooth 
connection will be lost. 

 

¾  As a power saving feature, the mouse will be 

automatically powered down after an idle 
period (when there is no activity for 
approximately 5 minutes). 

 

¾  When the Pocket PC device is turned off, the 

established Bluetooth connection will be lost. 

 

¾  When the Pocket PC device and the mouse are 

moved away from each other beyond the 
wireless range (~10m), the previously 
established connection is lost. 

 

When any of these conditions occurs, the connection will be lost and the 
software will switch to waiting mode. To restore the connection, make sure 
the mouse and Pocket PC device are powered on and in range, then press a 
mouse button. See 

 for further details. The connection 

should be reestablished within 2-3 seconds but this may be delayed if the 
Bluetooth system on the Pocket PC device is busy. For example, after the 
Pocket PC device is powered on, it may take 10 or more seconds for the 
Bluetooth system to re-initialize. 

NOTE: Do not press the Discoverable button. This will break the bond 
between the keyboard and the Pocket PC device. If this happens, you will 
have to establish a new connection as described above.

 

 

Even when disconnected, the Pocket PC device and the mouse remain 
bonded. The mouse will only reconnect to the bonded Pocket PC device and 
the Pocket PC device will only listen to the bonded mouse. To break the 
bond, press the Discoverable button. Normally the bond will not need to be 
broken unless the mouse will be used with another Pocket PC device or 
another mouse will be used with the Pocket PC device. Therefore, please 
avoid pressing the Discoverable button during normal operation. If this has 
happened, you will have to establish a new connection as described in the 

 section above.