Logically enables the device to communicate on the SCSI bus. Activate
Set Online at the device first, then have the host place the device
online (vary online).

Set Offline

Logically disables the device from the SCSI bus. Select Set Offline only
after the host has taken the device offline (vary offline) first.

Set Address

Provides the two SCSI addresses to be selected; one address that is
associated with each device interface. Each address consists of one
hexadecimal digit that specifies the SCSI address for that interface.
After the address is set, change the host information to include the
correct addresses.

Fibre Address

Provide the two Fibre Arbitrated Loop Physical Addresses (AL_PA) to
be selected; one address that is associated with each device interface.

Chapter 3. Drive Operator Panel and Controls