ICP DAS USA IM-100 Manual De Usuario

Figure 1-7 is for a lookup table where the values are arranged so that the 

camera output increases quickly as the sensor output moves from 0 

through 511 and increases gradually as the sensor output moves from 512 

through 1023. 

 

z 

n LUT enable and upload button that can be 

The EZView utility offers a

used to easily load a file containing a customized lookup table into the 

camera. The file must be plain text and must be formatted correctly. 

The file must have 1024 lines with each line 

containing two comma-separated values. 

The first value on each line represents a 10 

bit pixel reading from the sensor and the 

second value represents the corresponding 

8bit output that will be transmitted from the 

camera. 

The sample below shows part of a typical 

text file for a lookup table. Assuming that you 

have enabled the lookup table feature on 

your camera and used the upload button to 

load a file similar to the sample into the 

camera: 

The sensor reports that a pixel has a value of 

1, the camera will output a value of 0. 

The sensor report that a pixel has a value of 

6, the camera will output a value of 1. 

The sensor report that a pixel has a value of 

1019, the camera will output a value of 254. 

 - 

11 

-