Husky HSK1084HD Manual De Usuario
7
6
WARNINGS
• Do not use charger if cords or clamps have been damaged in any
way — call Technical Support toll-free at (866) 584-5504.
• There are no user-serviceable parts in this unit.
• Do not open the unit. In the event of malfunction, it must be returned
• Do not open the unit. In the event of malfunction, it must be returned
to manufacturer for professional testing and repair. OPENING THE
UNIT WILL VOID THE MANUFACTURER’S WARRANTY.
UNIT WILL VOID THE MANUFACTURER’S WARRANTY.
TROUBLESHOOTING
Display Indications/Common Problems/Possible Solutions
No Functions
• Check and make sure the charger is plugged into a live 110/120 volt AC outlet.
• Follow the steps outlined in the Operating Instructions section.
F01 — Internal Shorted Cell Battery
If the battery being charged has an internal shorted cell, the F01 will show. We
recommend taking your battery to a certified automotive service center for evaluation.
F02 — Bad Battery Connection or Battery Voltage Too Low to Accept
Charge
When F02 appears, the most common cause is poor connection to battery.
• Follow the steps outlined in “Important Safety Instructions” at the front of this manual
• Check and make sure the charger is plugged into a live 110/120 volt AC outlet.
• Follow the steps outlined in the Operating Instructions section.
F01 — Internal Shorted Cell Battery
If the battery being charged has an internal shorted cell, the F01 will show. We
recommend taking your battery to a certified automotive service center for evaluation.
F02 — Bad Battery Connection or Battery Voltage Too Low to Accept
Charge
When F02 appears, the most common cause is poor connection to battery.
• Follow the steps outlined in “Important Safety Instructions” at the front of this manual
to disconnect AC cord and clamps, clean battery terminal and reconnect.
• If the situation persists, we recommend taking your battery to a certified automotive
service center for evaluation.
F03 — Internal Open Cell
Have battery checked by a certified automotive service center.
F04 — Overtime Condition
F04 appears when charging time exceeds 18 hours.
You may be using a charge current rate too low for a large battery. Select higher
charge rate to charge the battery.
F05 — Overheated Condition
The ventilation grill that prevents the air from flowing in and out of the charger may
be blocked.
• Follow the steps outlined in “Important Safety Instructions” at the front of this manual
Have battery checked by a certified automotive service center.
F04 — Overtime Condition
F04 appears when charging time exceeds 18 hours.
You may be using a charge current rate too low for a large battery. Select higher
charge rate to charge the battery.
F05 — Overheated Condition
The ventilation grill that prevents the air from flowing in and out of the charger may
be blocked.
• Follow the steps outlined in “Important Safety Instructions” at the front of this manual
to disconnect AC cord and clamps, allow the unit to cool for 30 minutes and
reconnect.
reconnect.
• Make sure there is ample ventilation before resuming operation.
Charging a Very Cold Battery
If the battery to be charged is very cold (in temperatures below freezing —
0°C/ 32°F), it cannot accept a high rate of charge. The initial charge rate will be
low. The charge rate will increase as the battery warms. Never attempt to charge a
frozen battery.
0°C/ 32°F), it cannot accept a high rate of charge. The initial charge rate will be
low. The charge rate will increase as the battery warms. Never attempt to charge a
frozen battery.
HSK1084HD_Manual_062805.qxd 10/21/05 7:22 PM Page 6