Hughes HN7700S Manual De Usuario

 

The following requirements must be fulfilled before VADB can 
be used:

• The HN router must be configured for VADB operation 

before the system is installed and commissioned.  

• The site must have an analog telephone line to support VADB 

operation. A dedicated telephone line is preferred but not 
required. The HN router can share the telephone line with 
other devices when it is connected to a splitter.

The following tasks must be completed for VADB to work 
properly: 

• Before testing VADB functionality, you must use a phone 

handset to dial the VADB access phone number. For details, 
refer to Testing the telephone line on page 60.

• The telephone cable must be plugged into the TEL LINE port 

on the HN router and a telephone jack or splitter. (In some 
countries, a converter may be required to connect the cable to 
the phone jack.)

Installing VADB consists of the following tasks:

• Verifying that the VADB profile is loaded
• Testing the telephone line
• Testing VADB functionality

Before beginning the installation, check the telephone line local 
dialing rules. If it does not match the sequence in the installation 
specification, or as shown in the Advanced Pages, (see VADB 
troubleshooting on page 66), contact Installer Support.

Note:

The HN router can be upgraded to support VADB 

operation after it is installed.