HP E1368A Manual De Usuario
Appendix A
HP E1368A/69A/70A Specifications
HP E1368A Microwave Switch
Frequency Range:
DC-18 GHz
DC-18 GHz
Characteristic Impedence:
50
50
Ω
Insertion Loss:
DC-2GHz:
DC-2GHz:
<0.25dB
DC-18GHz:
<0.50dB
Isolation:
DC-18GHz:
DC-18GHz:
>90dB
VSWR (50
Ω
load):
DC-2GHz:
<1.15dB
DC-12.4GHz:
<1.25dB
DC-18GHz:
<1.40dB
Maximum Input Power:
1 Watt average.
100 Watts peak.
<
1 Watt average.
100 Watts peak.
<
±
7Vdc
Repeatability (typical):
0.03dB after 10
0.03dB after 10
6
switching
HP E1369A Microwave
Switch Driver
Switch Driver
Switching Dwell Time:
35msec
35msec
Driver OutPut per switch:
5V or 12V (see note 1)
5V or 12V (see note 1)
Maximum Energizing Voltage:
42Vpk (see note 1)
42Vpk (see note 1)
STANDARD VXIbus
INFORMATION
(Applies to both the HP E1368A
and E1369A unless otherwise noted)
INFORMATION
(Applies to both the HP E1368A
and E1369A unless otherwise noted)
Module Size/Device Type:
B, register-based
B, register-based
Connectors Used: P1
No. Slots:
E1368, E1369
E1368, E1369
1
E1370
2
VXIbus interface capability:
Slave, Interrupter, A16, D16
Slave, Interrupter, A16, D16
Interrupt level:
1-7, selectable
1-7, selectable
POWER REQUIREMENTS:
HP E1368A
Voltage:
Voltage:
+5
Peak module current,
IPM(A):
IPM(A):
1.30
Dynamic module current,
IDM(A):
IDM(A):
0.01
Watts/slot:
5.00
Cooling/slot:
0.08mm H
0.08mm H
2
0 @ 0.42 liter/sec
HP E1369A
Voltage:
Voltage:
+5
Peak module current,
IPM(A):
IPM(A):
0.01
Dynamic module current,
IDM(A):
IDM(A):
(see note 2)
Watts/slot: 0.50
Cooling/slot:
0.08mm H
Cooling/slot:
0.08mm H
2
0 @ 0.05 liter/sec
(see note 2)
HP E1370A
Voltage:
Voltage:
+5
Peak module current,
IPM(A):
IPM(A):
0.01
Dynamic module current,
IDM(A):
IDM(A):
(see note 2)
Watts/slot:
0.50
0.08mm H
0.08mm H
2
O
@0.05 liter/sec
(see note 2)
(see note 2)
MISCELLANEOUS:
Humidity:
65%, 0°to 40°C
65%, 0°to 40°C
Operating Temperature:
0° to +55° C
0° to +55° C
Storage Temperature:
-40° to +75° C
-40° to +75° C
EMC, RFI, Safety:
meets FTZ 1046/1984, CSA 556B,
IEC 348, UL 1244
meets FTZ 1046/1984, CSA 556B,
IEC 348, UL 1244
Net weight (kg):
HP E1368A: 0.5
HP E1369A: 0.2
HP E1370A: ??
HP E1368A: 0.5
HP E1369A: 0.2
HP E1370A: ??
NOTES:
1. Control circuit can switch a
maximum of 1A per switch.
Maximum current also depends on
the output capability of the
mainframe used.
2. Power and cooling requirements
depend on switches installed; see
HP E1368A for an example of the
requirements for 3 HP 3331X or
HP 876X switches.
maximum of 1A per switch.
Maximum current also depends on
the output capability of the
mainframe used.
2. Power and cooling requirements
depend on switches installed; see
HP E1368A for an example of the
requirements for 3 HP 3331X or
HP 876X switches.
Appendix A
HP E1368A/69A/70A Specifications 73