Hoya 15086 Manual De Usuario

169

6

3

4

The camera turns on in video mode or HDMI mode, and the camera 
information is displayed on the screen of the connected AV device.

Set the video/HDMI output format according to the connected terminal.
Normally, the default output format setting does not have to be changed. 
However, if it fails to play back images/movies properly, change the setting.

When the hometown is set at the time of initial setting (p.48), the video 
output format is set in accordance with that region. Depending on the 
country or region, images/movies may fail to be played back with the set 
video output format. If this happens, change the setting.

1

Select [Video Out] in the [R Set-up 2] menu, and press the 
four-way controller (5).

2

Use the four-way controller (23) to select [NTSC] or 
[PAL], and press the 4 button.

3

Press the 3 button.

The screen that was displayed before selecting the menu appears again.

When using the video output, images/movies are output at normal resolution 
regardless of the resolution supported by the AV device. To output HD video, 
use the HDMI output or transfer to and play back on a computer.

To change the setting, remove the cable first before proceeding.