Hitachi Microscope & Magnifier S-4800 Manual De Usuario

2 - 48

 

(1) AUTO DATA DISPLAY block 
 

(1-1) Auto Data Display 

Auto data display is engaged when this box is checked. 

(1-2) Magnification to Time and Signal Name checkboxes 

These items are include in data display if checked. 

(1-3) Data Number input box   

Input data number into this box. Up to ten characters 
may be keyed in. Do not use "," (comma) and " " 
(space). 
If the Auto Increment check box is checked and the 
Data Number has “-nn” at its end (n : numerals, for 
example “Hitachi-00” ), Data Number is incremented 
with each successive photographing. 

(1-4) Back Ground Image checkbox 

When this box is checked, the data display is overlaid 
on the scanning image. If it is not checked, the 
background of the data display area is black. 

(1-5) Embed into Image checkbox 

When this box is checked, the auto data display is 
embedded into the image data when the image is 
saved to disk. If it is not checked, only the image data 
is saved. This Setting is also applied for Print, Copy and PCI Transfer commands. 
If the For Photograph is checked, the position of the auto data display in the saved 
image is shifted slightly upward to ensure that it is properly framed in photographs. It 
is recommended not to check the box if the saved image data will be used on the 
computer only. 

 
(2) PHOTO SPEED block 
 

(2-1) Direct Photo 

Selects a scanning speed for direct photo recording. The number of lines for the 
selected scanning speed is shown under the box. 

(2-1) Memory Photo 

Selects number of scanning lines for memory photo recording. 
      Normal: 
      For 640×480 pixels image data 
   

→960 lines (16/19 s photographing time) 

      For 1280×960 pixels image data 
   

→960 lines (16/19 s photographing time) 

      For 2560×1920 pixels image data 
   

→1920 lines (32/38 s photographing time) 

      Enhance: