Hitachi Microscope & Magnifier S-4800 Manual De Usuario
3
-
102
3.9.14 Oblique Image
An oblique (or birds-eye-view) image is formed from scanning image.
To open the Oblique window, select the Oblique command from the Analysis.
An oblique (or birds-eye-view) image is formed from scanning image.
To open the Oblique window, select the Oblique command from the Analysis.
(1) Setting properties
Check the Image box to show reference image together with oblique image.
Birds eye area specifies viewing angle and tilting angle. If it is not checked, just flat image is
formed.
X resolution and Y line specifies number of horizontal pixels and vertical lines. Too much Y
line may cause overlapping of lines and result complicated image. Select proper number.
Gain sets height of modification.
Brightness modulation modulates brightness of each line with signal intensity. If not checked,
lines are drawn with foxed brightness.
Birds eye area specifies viewing angle and tilting angle. If it is not checked, just flat image is
formed.
X resolution and Y line specifies number of horizontal pixels and vertical lines. Too much Y
line may cause overlapping of lines and result complicated image. Select proper number.
Gain sets height of modification.
Brightness modulation modulates brightness of each line with signal intensity. If not checked,
lines are drawn with foxed brightness.
(2) Drawing and recording oblique image
Go button starts drawing image. Photo button is for photographing (needs photo monitor
option). Click Save to save the oblique image.
option). Click Save to save the oblique image.