Harbor Freight Tools 4_1/2 in. Portable Wet Cut Tile Saw Manual Del Producto
Page 8
For technical questions, please call 1-800-444-3353.
Item 69230
SAFETY
OPERA
TION
MAINTENANCE
SETUP
Specifications
Electrical Rating
120V~ / 60Hz / 4.1A
Motor No Load Speed
5,300 RPM
Arbor Size
5/8"
Max. Accessory Diameter 4-1/2"
Bevel Cut
Bevel Cut
45
°
Maximum Depth of Cut
7/8" @ 90
°
Blade Type
Diamond (sold separately)
E180772
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its
electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Assembly/Mounting
Insert the four Rubber Feet into the molded openings on the bottom of the Base.
Installing the Upper Blade Guard
1. The Riving Knife which holds the Upper
Blade Guard is installed through a slot
from beneath the Table Insert. Unthread
the three screws holding the Table Insert
in place and remove the Table Insert.
Slot on Table Insert for Riving Knife
Figure 1
Bolt hole for
Riving Knife