Grindmaster Refrigerator 6321L Manual De Usuario
The freezer is equipped with an automatic defrost system to allow the frozen product to melt back to a liquid. This
eliminates any large ice crystal formation or poor product consistency that may develop. This automatic timer can be
pre-programmed to occur at desired times of the day. The defrost cycle takes four hours to complete and should be
programmed in.
eliminates any large ice crystal formation or poor product consistency that may develop. This automatic timer can be
pre-programmed to occur at desired times of the day. The defrost cycle takes four hours to complete and should be
programmed in.
The freezer has been operated and tested at the factory. Upon arrival the complete freezer
must be thoroughly checked for any damage which may have occurred in transit. NOTE: A
Tip (N) Tell warning device is placed on each shipping carton at the factory. If the arrow tip is
blue, the carton has been tipped in transit. (See Figure 1)
IMPORTANT: The carrier is responsible for all damage in transit whether visible or con-
cealed. DO NOT PAY THE FREIGHT BILL until the freezer has been checked for damage.
Have the carrier note any visible damage on the freight bill. If concealed damage and/or
shortage is found later, advise the carrier within 10 days and request inspection. The cus-
tomer must place any claim for damage and/or shortage with the carrier. The manufacturer
cannot make any claims against the carrier.
must be thoroughly checked for any damage which may have occurred in transit. NOTE: A
Tip (N) Tell warning device is placed on each shipping carton at the factory. If the arrow tip is
blue, the carton has been tipped in transit. (See Figure 1)
IMPORTANT: The carrier is responsible for all damage in transit whether visible or con-
cealed. DO NOT PAY THE FREIGHT BILL until the freezer has been checked for damage.
Have the carrier note any visible damage on the freight bill. If concealed damage and/or
shortage is found later, advise the carrier within 10 days and request inspection. The cus-
tomer must place any claim for damage and/or shortage with the carrier. The manufacturer
cannot make any claims against the carrier.
1) Read and understand the operating instructions in this manual thoroughly.
2) Note all warning labels on the freezer.
3) Do not wear loose fitting garments or jewelry that could cause a serious accident.
4) Stay alert at all times during operation.
5) Keep operating area clean.
2) Note all warning labels on the freezer.
3) Do not wear loose fitting garments or jewelry that could cause a serious accident.
4) Stay alert at all times during operation.
5) Keep operating area clean.
Do not operate freezer if any excessive noise or vibration occurs. Contact an authorized service agent.
Safety and Inspection
Safety Precautions
Loose Parts Shipped with Unit
Unpacking and Inspection
Shipment and Transit
Figure 1
Crathco Beverage Freezers
Page 3
Part #
Name
Quantity
90881
Installation Guide
1
90882
Operators Manual
1
W0660060
Plastic parts bag
1
W0600121
Header installation instruction sheet
1
W0631903
Sanitizer packets
6
W0600159
Warranty card
1
W0890237
Drip pan kit
1
W0340022
“O” ring #213
6
W0660300
Dow Corning Silicone lubricant
1
W0480437
Plunger, Slush pressure
1
W0480445
Handle, valve
1
W0611728
Fas-Pin
1
W0631230
Compression Spring
1
W0660016
Silicone adhesive
1
W0610718
Screw 5/16-18 Hex Hd
2
W0611255
Washer, 5/16” lock
2
W0611086
Nut, 5/16” Hex, Zinc
2
60382
Heyco 1” snap bushing
1
90748
Silicone Nozzle
6
90749
Bottle Holddown Clamp
6
90750
Adjustment Knob
6
90770
90° Support
1
90878
Lock Washer #10
6
W0611254
Washer
2
W0631549
Coke® Cleaning Fitting
1