Graco FORERUNNER 210 Manual De Usuario

Appendix

1.  Use a small Phillips screwdriver to 

remove the four screws on the back 

of the module.

2.  Remove the cover and battery. 

3.  Wait 30 seconds. 
4.  Insert the new battery with the 

positive side facing up.
NOTe: Do not damage or lose the 

O-ring gasket.

5.  Replace the back cover and the four 

screws.

After you replace the heart rate monitor 

battery, you must pair it with the device 

again.

1.  Locate the circular battery cover on 

the back of the device.

2.  Twist the cover counter-clockwise  

until it is loose enough to remove.

3.  Remove the cover and the battery.
4.  Wait 30 seconds.
5.  Place the new battery into the cover 

with the positive side facing the 

inside of the cover.

6.  Replace the cover by aligning 

the dots and rotating the cover 

clockwise.

After you replace the foot pod battery, 

you must pair it with the device again.