Goldline USA Swimming Pool Filter AQ-LOGIC-PS-4 Manual De Usuario

Pool-only or spa-only systems:  The POOL/SPA button has no function.

Pool and Spa systems without spa spillover:  In pool-only mode (the left LED illuminated), press the

POOL/SPA button to switch to spa-only operation (right LED illuminated).  Pressing the POOL/SPA

button again will switch back to pool-only.

Pool and Spa systems with spa spillover:  When currently in the pool-only mode (the left LED illumi-

nated), press the POOL/SPA button to switch to spa-only operation (right LED illuminated).  Press the

button again to switch to spa spillover operation (both LEDs illuminated).  Pressing the POOL/SPA button

again will switch back to pool-only mode.

The main unit keypad has a SERVICE  key.  This button is used primarily during servicing of the pool

equipment.  If you want to completely disable the automatic operation and operate the system manually,

you can put the system into Service or Service-Timed mode by pressing the SERVICE button.  Pressing

the SERVICE button once will switch the system into service mode which means that all automatic func-

tions are disabled, the remote display/keypads are disabled (except for manual turn off for emergencies).

The red service LED will be illuminated and the Aqua Logic will remain in this mode of operation until

manually taken out of service mode.

Pressing the SERVICE button again will cause the Aqua Logic to switch to service-timed mode which is

very similar to service mode, except that the Aqua Logic will automatically return to normal operation after

3 hours.  During service timed operation, the service LED will flash and the time remaining will be dis-

played on the remote display/keypad(s).

Pressing the SERVICE button again, will return the Aqua Logic to normal (automatic) operation.

See Troubleshooting/Diagnostic Information (page 21) for more information about the service modes.