Goodman Mfg G-SHOT 3029TFT Manual De Usuario
17
In the below table, default setting is indication with an asterisk [Þ]
[ Auto Off ]
Þ
1min
/
3min
/
Never Sleep
Functions:
- This item determines the auto-off time when the camera stay idle
[Beep]
Þ
1min
/
3min
Functions:
- This item allows you to toggle the beep sound on or off
[Brightness]
LCD Brightness Range : -2.0 (darker) to +2.0EV(brighter)
ÞDefault setting :
0
Functions:
- This item allows you to adjust the brightness level of LCD monitor
[ TV System]
You can view stored movies and pictures on a Television with 2 main TV systems
Þ
TV (PAL)
/
TV (NTSC)
Note: Setting TV System
- TV(PAL) for PAL standard: UK, Europe, China, Australia, Singapore & Hong Kong etc.
-
TV(NTSC) for NTSC standard : USA, Canada, Japan, South Korea and Taiwan etc.
[Format]
This item allows you to format the store media that is currently in use.
Functions:
- You can use this function to prepare the SD card to record media, BUT all files stored in
media will be gone after executing this function!
media will be gone after executing this function!
[Date/Time
Setting]
This item is for date & time setting.
l
Move between Date, Time and Exit by using Left/Right buttons.
l
Adjust date and time by using Up/Down buttons, then select OK to validate each
change.
change.
l
Select MENU to leave Time Setting without any change.
Note:
-
-
If you remove the battery from the camera, you will need to set the date and time again the
next time you reinsert the battery and use the camera.
[Beep]
Þ
1min
/
3min
In case the camera's frequency setting does not match electricity frequency under the
fluorescent light, flickering may be seen. To avoid flickering,
-
fluorescent light, flickering may be seen. To avoid flickering,
-
Select 50Hz for European frequency , Or 60Hz for US / Taiwan frequency
[Default Setup ]
Use this function to return the camera settings to default values except for date & time
[Version ]
This function shows the camera’s software version (this info is used by service centre)