gohastings.com Hastings Entertainment Cable Box DAVC-4 Manual De Usuario

Descargar
Página de 17
174-082010_Digital AVC
 
Page 5 of 17
 
1.3  Compliance data 
 
 
 
 
 
 
 
 
1.4  Safety 
The following symbols and terms may be found on THI products and/or in THI manuals and indicate 
important information. 
When found on the device, this symbol indicates that the operator should refer to the manual for 
important instructions on the proper use of this device. When found in a manual, this symbol 
indicates that the reader should understand the implications contained in the text before 
operating the device. 
The WARNING label indicates important information that should be heeded for safe and proper 
performance of the device. 
The label, CAUTION, is used to indicate that damage to the power supply or equipment connected to it, 
could occur if directions are not followed. Warranty could be invalidated if the instructions in this manual are 
not followed. 
Accessories 
1.4.1  Installation Accessories 
 THI offers a complete line of system attachments that 
permit easy maintenance for contaminated operations. 
Gauge tubes are offered with various system fittings to 
match almost any system requirement. Additionally, 
THI’s complete line of quick disconnect attachments 
allows customers to install these special fittings and 
easily replace sensors without vacuum sealant or 
Teflon® tape. For particularly dirty systems, Hastings 
offers a particle dropout trap containing a series of nine 
separate baffles which prevent solid contaminants from 
having a direct path to the sensor’s thermopile. 
1.4.2  DV-6S: New DV-6 tube For Severe 
Environments  
 Hastings Instruments has developed a new gauge tube, the DV-6S, which is specifically designed for 
outdoor use on cryogenic tanks including railcar and tanker truck applications. In addition to the DAVC, the 
gauge tube is compatible with the hand-held HPM-4/6 and the analog VT-6. 
The DV-6S is supplied with a protective cap. The o-ring-sealed cap protects the gauge tube pins from 
moisture thus significantly reducing corrosion. A metal lanyard prevents cap loss. The tube is provided with 
a standard 1/8” NPT fitting; however special fitting requests can often be met. 
CE Standard Compliance 
Test Standard 
SAFETY EN61010 
EMC/EMI Family 
EN61326 
CONDUCTED/RADIATED EN55011 
ESD EN61000-4-2 
RF EN61000-4-3 
CONDUCTED IMMUNITY 
EN61000-4-6