Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Global Upholstery Co.
  4. 2801330
  5. Manual De Usuario

Global Upholstery Co. 2801330 Manual De Usuario

Descargar
Página de 76
  
Page 80 
 
IEI® Technology, Corp. 
KINO-LX Motherboard
 
 NOTE: 
When two EIDE disk drives are connected together, back-end jumpers on 
the drives must be used to configure one drive as a master and the other as 
a slave. 
4.5.2 COM3-COM6 RS-232 Serial Port Installation 
The cable used to connect the motherboard to an RS-232 serial port is a 10-pin header to 
male D-sub 9 connector. To connect an RS-232 serial port to the motherboard, follow the 
instructions below. 
Step 1: 
Step 2: 
Step 3: 
Step 1: 
Find the RS-232 cable in the kit that came with the motherboard. 
Connect the 10-pin connector end of the cables to the COM3 to COM6 box 
headers on the motherboard. Be sure to align the red wire on the connector to 
pin 1 on the box header. 
Connect the other end of the cables to standard female D-sub 9 connectors.
Step 0:
 
4.5.3 COM2 RS-232/485 Serial Port Installation 
To connect an RS-232/485 serial port to the motherboard, follow the instructions below. 
Connect the 14-pin connector end of an RS-422/485 serial port cable to the 
CN10 connector on the motherboard.
Step 0:
 
 
NOTE:
 
Be sure to configure the JP2 COM2 RS232/RS485 Select Jumper for either an 
RS-232 or RS-485 connection. Refer to Section 4.5 for more information.