Gimp - 2.4 Guía Del Usuario
GNU Image Manipulation Program
204 / 653
12.4.4.4
Options
Figure 12.51: Rotation tool options
Overview The available tool options for the Rotate Tool can be accessed by double clicking the Rotate Tool icon.
Affect; Interpolation; Supersampling; Clip Result; Preview
Note
These options are described in
These options are described in
Transform Direction The Transform Direction sets which way or direction a layer is rotated. The Traditional mode will rotate
the layer as one might expect. If a layer is rotated 10 degrees to the right, then the layer will be rendered as such. This
behaviour is contrary to Corrective rotation.
behaviour is contrary to Corrective rotation.
Corrective Rotation is primarily used to repair digital images that are not straight. If the image is 13 degrees askew then
you need not try to rotate by that angle. By using Corrective Rotation you can rotate visually and line up the layer with the
image. Because the transformation is reversed, or performed backwards, the image will be rotated with sufficient angle to
correct the error.
you need not try to rotate by that angle. By using Corrective Rotation you can rotate visually and line up the layer with the
image. Because the transformation is reversed, or performed backwards, the image will be rotated with sufficient angle to
correct the error.
Constraints 15 Degrees will constrain the rotation to angles divisible by 15 degrees.
12.4.4.5
The Rotation Information window
Figure 12.52: The Rotation Information dialog window