GenTran Webcam 5.1 Manual De Usuario

Viewing Events

Using Process Control

Gentran:Server for Windows – November 2005

Gentran:Server for Windows User’s Guide

11 - 34

To view active events, complete the following steps: 

5

If necessary, change the Refresh options:

◗

If you want to change the interval in which the dialog box is 
automatically refreshed, type the interval (in seconds) at which 
you want the system to refresh the dialog box (the default is 20 
seconds) in the Seconds box. Valid values are 2 – 300 seconds. 

This value is saved when you change focus on the dialog box 
(click another box). The Auto Refresh check box must be 
selected (checked) for the Seconds box to be available.

◗

If you do not want the Events tab on the Gentran:Server 
Process Control dialog box to automatically refresh (so you 
have to manually click Refresh), click the Auto Refresh check 
box to deselect it.

The default for automatic refresh (so you do not have to click 
Refresh) is enabled (checked).

6

Click OK.

System response
The system exits the Gentran:Server Process Control dialog box.

1

Click Process Control on The Desk.

System response
The system displays the Process Control dialog box (Active Events 
tab).

2

From the Event list, select the event for which you want to view 
further detail. 

Note
The system displays each command and its associated parameters in 
the session script for that event in the Session list. The session 
command currently being processed is indicated with a green arrow.

(Continued on next page)