Genius Stereo Amplifier 740A Manual De Usuario
The 740A is supplied with an Azur Navigator remote control that
operates both this amplifier and Cambridge Audio Azur CD players.
Insert the supplied AAA batteries to activate.
operates both this amplifier and Cambridge Audio Azur CD players.
Insert the supplied AAA batteries to activate.
The 740A/C remote control comes with an Amplifier
Control button, that when pressed, puts the remote
into Amp mode, allowing operation of the 740A. When
pressed, the LED will light up for 7 seconds (to let you
know you are in Amp mode), and will then flash when
one of the circled Amp buttons is pressed. All other
remote buttons are inactive when in Amp mode.
Control button, that when pressed, puts the remote
into Amp mode, allowing operation of the 740A. When
pressed, the LED will light up for 7 seconds (to let you
know you are in Amp mode), and will then flash when
one of the circled Amp buttons is pressed. All other
remote buttons are inactive when in Amp mode.
The functions relevant to the amplifier are as follows:
Standby/On
Switches the amplifier between On and
Standby mode.
Standby mode.
Numerical buttons 1-6
Press to change the input source to the
amplifier. Button 6 toggles Tape Monitor
on/off.
amplifier. Button 6 toggles Tape Monitor
on/off.
Mode
Press to switch between Volume and
Balance modes.
Balance modes.
Mute
Mutes the audio on the amplifier. The
mute mode is indicated by MUTE
appearing and the volume level being
replaced by two flashing dashes in the
display. Press again to cancel mute.
mute mode is indicated by MUTE
appearing and the volume level being
replaced by two flashing dashes in the
display. Press again to cancel mute.
Volume
Increase or decrease the volume of the
amplifier output.
amplifier output.
Speaker A/B
Press to scroll through the speaker sets
connected to the loudspeaker terminals
on the back panel (speaker sets A, B or
A and B).
connected to the loudspeaker terminals
on the back panel (speaker sets A, B or
A and B).
Bright
Adjust the backlight of the front panel
display; bright, dim or off.
display; bright, dim or off.
To exit Amp mode (and return to CD
mode), press the Amp Control button
again (the LED will light up for one
second).
mode), press the Amp Control button
again (the LED will light up for one
second).
740A
azur
7
ENGLISH
Remote control
Vol
Vol
Random
Repeat
Select
Remain
A - B
Menu
Space
Speaker
A/B
Intro
Mode
Prog
Amp
Control
Mode
Speaker
A/B
The 740A/C remote can also control the basic functions of Apple iPod’s
when mounted in Apple’s Universal Dock (or other docks compatible
with the Apple Remote). Refer to your dock’s instruction manual on how
to connect it to your amplifier.
when mounted in Apple’s Universal Dock (or other docks compatible
with the Apple Remote). Refer to your dock’s instruction manual on how
to connect it to your amplifier.
To use the Azur remote to control the docked iPod, put the remote into
Amp mode and press one of the following buttons:
Amp mode and press one of the following buttons:
Play/Pause
Press to play the iPod, press again to pause play.
Skip
Press once to skip forwards or backwards one track.
Menu
Press to return to the iPod main menu.
iPod
TM
compatibility