GE X-9 Manual De Usuario
7 Effects
TASCAM X-9
Owner’s Manual
25
Recalling stored effect settings
There are two procedures, depending on whether the
EFFECT
key is lit or not.
If the
EFFECT
key is lit…
1
Press and hold the
FUNCTION
key for
about two seconds. The
display shows
display shows
MEMO
(MEMO).
2
Turn the
DATA
knob coun-
terclockwise so that the
effect
effect
RECALL
indicator is
flashing.
3
Press the
ENTER
key. The
RECALL
indicator now lights steadily.
4
Turn the
DATA
knob to choose between the
numbers of the slots which have been filled
(the numbers of empty slots are not shown)
and
(the numbers of empty slots are not shown)
and
dFLt
(dFLt—default).
5
Press the
ENTER
key to recall the
settings. The effect is activated, and
after one second, the X-9 returns to
the “recalled” status in step
after one second, the X-9 returns to
the “recalled” status in step
3
.
Alternatively:
If the
EFFECT
key is not lit…
1
Press and hold the
FUNCTION
key for
about two seconds.
The
The
RECALL
indica-
tor lights.
2
Turn the
DATA
knob to choose
between the numbers of the slots
which have been filled (the numbers
of empty slots are not shown) and
which have been filled (the numbers
of empty slots are not shown) and
dFLt
(dFLt—default).
3
Press the
ENTER
key to recall the
settings. The effect is activated (but
cannot be heard until the
cannot be heard until the
EFFECT
key is lit), and after one second, the X-9
returns to the “recall ready” status in step
returns to the “recall ready” status in step
2
.
In both cases:
Exit the store/recall mode by pressing the
FUNCTION
key for about 2 seconds or press-
ing the
EFFECT
key or changing the effect
type with the effect selection control.
TIP
You can clear all stored effect settings using the menu
system (25Ec). See “Clear all effect memories” on
page 20 for details.
system (25Ec). See “Clear all effect memories” on
page 20 for details.
MEMO
MEMO