GE X-9 Manual De Usuario
10 Specifications, etc.
TASCAM X-9
Owner’s Manual
33
Mounting the X-9 in a rack
When mounting the X-9 in a 19” rack, use only the
supplied rack-mount ears and mounting screws, etc.
supplied rack-mount ears and mounting screws, etc.
As shown here, remove the five screws (1) on the left
side of the unit.
side of the unit.
Locate and fit the left rack-mount angle (with the fan
cutout) and fasten it to the X-9 using the five screws
removed in the previous step.
cutout) and fasten it to the X-9 using the five screws
removed in the previous step.
Fit the right rack-mount angle in the same way.
Case mounting
WARNING
It is most important that if you are mounting the X-9 in
a rack or in a case, that the supplied fan cover and ven-
tilation cover are fitted as explained here. This ensures
a smooth airflow, and prevents the fan and ventilation
vents from being blocked, which could cause overheat-
ing and damage to the X-9.
a rack or in a case, that the supplied fan cover and ven-
tilation cover are fitted as explained here. This ensures
a smooth airflow, and prevents the fan and ventilation
vents from being blocked, which could cause overheat-
ing and damage to the X-9.
Remove the two screws (1) on the left side of the X-9
as shown here.
as shown here.
Use the four screws supplied with the fan cover to
attach the fan cover.
attach the fan cover.
Repeat the process for the ventilation cover on the
right side of the X-9.
right side of the X-9.