Garmin vivofit Manual De Propietario

• Select GPS Tools > Geocaches.

Select a destination.

Select Go.

The device displays time to destination 

À

, distance to 

destination 

Á

, and estimated time of arrival 

Â

.

Select   to view the compass page.

The two pointer marks 

Ã

 serve as a bearing pointer. The top 

mark on the device points in the direction you are facing.

Align the pointer marks with the top mark.

Continue in that direction until you reach the destination.

You can point the device at an object in the distance, such as a 

water tower, lock in the direction, and then navigate to the 

object.

Select the action key.

Select GPS Tools > Sight 'N Go.

Point the top mark on the bezel at an object.

Select the action key.

Select an option:
• Select Set Course to navigate to the distant object.
• Select Project (

Navigate using the compass (

The device has a 3-axis compass with automatic calibration.

• Compass navigation (

• Compass settings (

)

Calibrate the electronic compass outdoors. To improve heading 

accuracy, do not stand near objects that influence magnetic 

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the 

device uses automatic calibration by default. If you experience 

irregular compass behavior, for example, after moving long 

distances or after extreme temperature changes, you can 

manually calibrate the compass.

Select the action key.

Select Setup > Sensors > Compass > Calibrate > Start.

Follow the on-screen instructions.

 represents your location on the map. As you travel, the icon 

moves and leaves a track log (trail). Waypoint names and 

symbols appear on the map. When you are navigating to a 

destination, your route is marked with a line on the map.
• Map navigation (

)

• Map settings (

)

While navigating, select   to view the map.

Select the action key.

Select an option:
• To pan up or down, select Pan, and select   or  .
• To pan right or left, select Pan > 

, and select   or  .

• To navigate to a saved location, select Pan, select the 

action key, and select Select Pt..

• To zoom in or out, select Zoom, and select   or  .

While navigating, you can navigate back to the beginning of 

your track. This can be helpful when finding your way back to 

camp or the trail head.

Select the action key.

Select Tracks > Current > TracBack.

Your current location 

À

, track to follow 

Á

, and end point 

 

appear on the map.

The device contains an internal altimeter and barometer.
• On Demand sensor data (

)

• Always On sensor data (

)

• Altimeter settings (

• Altimeter and barometric readings (

Your device was already calibrated at the factory, and the 

device uses automatic calibration at your GPS starting point by 

default. You can manually calibrate the barometric altimeter if 

you know the correct elevation or the correct sea level pressure.

Select the action key.

Select Setup > Sensors > Altimeter.

Select an option:
• Select Auto Cal. > At Start to calibrate automatically from 

your GPS starting point.

• Select Auto Cal. > Continuous to calibrate automatically 

with periodic GPS calibration updates.

• Select Calibrate to enter the current elevation or sea-

level pressure.

You can use your device to track changes in barometric 

pressure over time. Increases in barometric pressure usually 

indicate good weather, and decreases in barometric pressure 

usually indicate bad weather.

Select the action key.

Navigation

5